Snom D712 - Turning off Call Forwarding; Turning Forwarding of All Calls on and off with a Function Key

57
D712/710 User Manual Using the Phone
displayed. If there are other status messages with a higher priority than "Forward when Busy"
(e.g., firmware update available, reboot required, waiting for call completion, etc.), they will take
precedence over the call forwarding indication.
When "Forward when Busy" and/or "On timeout" are turned on, the
Info
function key is available in
the function key line. Press the key to show the "Status info" screen with all current status messages,
including call forwarding.
Note: When there is more than active identity, the information in the status line and the
status info menu is that of the current outgoing identity.
Turning off call forwarding
Forward all Forward when busy Forward after timeout
Press
on idle screen to select identity if more than one is available and if necessary
Press
Settin Settin Settin
Press
2 Call Features 2 Call Features 2 Call Features
Press
1 Call Forwarding 1 Call Forwarding 1 Call Forwarding
Press
1 Forward All
2 When Busy
3 On Timeout
Press
1 Activate 1 Activate 1 Activate
The menu item changes to "1
Activate", indicating that call forwarding is now o. Press for two
seconds to return to the idle screen.
Turning forwarding of all calls on and off with a function key
Turning on forwarding of all calls with a function key
If the function key
CFwd
is not available when the display is in idle mode, you can make it available
on the Function Keys page of the phone's web interface. For further information see "Example 4,
Programming a context-sensitive function key" on page 65.
1. Press
on idle screen to select the identity if more than one is available and if necessary.
2. Press
CFwd
. The display will show the "Target when Forwarding" screen.
3. If no forwarding number has been set or if it needs to be changed, make the necessary entries.
4. Press
.
The display now says "Forward all", followed by the number/extension calls will be forwarded to. The
function key now reads
noFwd
.
Turning off forwarding of all calls with a function key
1. Press
on idle screen to select identity if more than one is available and if necessary.
2. Press
noFwd
.