Snom D712 - Hide My Caller ID

79
D712/710 User Manual Customizing the Phone Settings
Setting on the phone
The setting is applied to the outgoing identity at the time it is saved. If you want to change the setting
for other identities, select each one as the outgoing identity in turn and repeat the steps.
1. Press
Settin
> 2 Call Features > 3 Incoming Calls > 2 Call Waiting.
2. Select setting with .
3. Press
to save.
Setting on the web interface
Call waiting is set independently for each identity.
1. In the menu on the left, click on the identity whose call waiting settings you want to change.
2. Click on the SIP tab. The setting Call Waiting Indication is the second to last on the page.
3. To turn call waiting o, select "o" from the drop-down menu. Select "visual only" or "ringer"
if you want waiting calls announced only by the "phone ringing" symbol or by the double beep,
respectively.
4. Click on Apply and Save.
Hide my caller ID
With this setting your phone number will not be transmitted to any phones you call. Please note that
your call may not be accepted if the other phone is set to reject anonymous calls (see next item).
Setting on the phone
1. Press
Settin
> 2 Call Features > 3 Outgoing Calls > 5 Hide own outgoing ID.
2. Press
or scroll down to the setting and press to change it from o to on:
5
Hide own outgoing ID.
3. Press
briefly to return to the previous menu, press for two seconds to return to the idle
screen.
Setting on the web interface
1. Open Preferences page > Privacy Settings section > Suppress own number (CLIP/CLIR).
2. Select the radio button Hide.
3. Click on Apply and Save.