Snom D712 - Time and Date Settings; Time Zone

73
D712/710 User Manual Customizing the Phone Settings
• Web interface settings.
1. Open Preferences > General Information > 24 Hour Clock. The default is "on".
◦ Select "on" to have the time on the phone's display shown in 24-hour format, 00:01 to 24:00 .
◦ Select "o" to have the time on the phone's display shown in AM/PM format, 0:01 AM to 12:00
PM.
2. Click on "Apply" and "Save".
Time and date settings
See Time zone, below.
Time zone
Note: The time zone setting is accessible in admin mode only.
You can change the time and date settings manually in admin and user mode, but the
settings will be overwritten at the next reboot of the phone: (
Settin
> 1 Preferences >
1 Date & Time > 4 Time (3 in user mode) > 5 Date (4 in user mode)
The phone receives the time and date from your NTP time server. If the time and/or date on the
display are incorrect, you may need to set the correct time zone. If you have set the correct time zone
and the time is still incorrect, there may be a problem with the time server. Contact your network
administrator or your IP provider.
The list of time zones is arranged by the dierence in hours (+/-) to the UTC and, within each time
zone, alphabetically by selected locations (country or country and city). The time zone can be
selected and set on the phone as well as on the web interface.
Setting on the phone
1. Press
Settin
> 1 Preferences > Date & Time > 1 Time Zone.
◦ Press
Reduc
to collapse the list to show only selected times zones where the phone
language is spoken.
◦ Press
More
to show all time zones.
◦ Press
Jump
to fast-forward to the beginning of the next time zone, i.e., UTC +1, +2, etc.
◦ Use
/ to scroll.
2. Press
to save your selection
3. Press
for two seconds to return to the idle screen.
Setting on the web interface
This setting can be accessed in administrator mode only.