Snom D712 - Page 77

77
D712/710 User Manual Customizing the Phone Settings
When busy
Calls ringing while the phone is busy are forwarded to the number of the phone, extension, or mailbox
specified as this function’s target.
After timeout
When a call starts ringing, the phone will wait for the number of seconds specified as "call forwarding
time". If the call has not been accepted by the end of this time period, it is forwarded to the number of
the phone, extension, or mailbox specified as this function’s target.
Configuring the settings on the phone
See "Call forwarding" on page 55.
Configuring the settings on the web interface
If your internet telephony provider or your PBX uses codes to turn functions on and off, refer to their
manuals for the codes to enter in the "On Code"/"Off Code" text fields or ask your administrator.
Setting forwarding numbers
• Forwarding all incoming calls:
1. Open Configuration Identity # > Features tab > Call Forwarding > Always.
2. Type the phone number in the "Target" text field. Type each number the way it needs to be
dialed by the phone, without spaces or punctuation between the digits.
3. Click on Apply and Save.
• Forwarding incoming calls when the phone is busy:
1. Open Configuration Identity # > Features tab > Call Forwarding > Busy.
2. Type the phone number in the "Target" text field. Type each number the way it needs to be
dialed by the phone, without spaces or punctuation between the digits.
3. Click on Apply and Save.
• Forwarding incoming calls when they are not answered:
1. Open Configuration Identity # > Features tab > Call Forwarding > Timeout.
2. Type the phone number in the "Target" text field. Type each number the way it needs to be
dialed by the phone, without spaces or punctuation between the digits.
3. Click on Apply and Save.
Turning call forwarding on
1. Web interface > Configuration Identity # > Features tab > Call Forwarding.
2. Click On after the forwarding event ("Always", "Busy", "Timeout").
3. Click on Apply and Save.