56
v1.02
Admin and Installation Guide M900 Description of Settings
Setting Description
Syslog/SIP Log
Upload of SIP log When enabled, low-level SIP debug messages will be saved to the server in
the following file format: <MAC_address><Time_Stamp>SIP.log
Default: Disabled.
SIP log server address Permitted values: IP address or URL.
Default: Empty.
Syslog level O: No data is saved on syslog server
Normal operation: Normal operation events (incoming and outgoing calls,
handset registration, DECT location, call lost due to busy) as well as critical
system errors and general system information are logged.
System analyze: Handset roaming and handset firmware updates status in
addition to the normal operation messages.
Debug: Used by Snom for debug. Should not be enabled during normal
operation.
Default: Normal operation.
Syslog server IP address Permitted values: IP address or URL.
Default: 0.
Syslog server port Port number of syslog server.
Default: 514.
License Not necessary. Setting: empty.
To Next Page
Loading...
