Software Bisque Paramount 6 Series - Page 119

Paramount GEM User Guide
119 | P a g e
Initialization-Related
Parameter
Description
Mount Type
Defines the physical telescope mounting type:
0 = German Equatorial Mount.
1 = Asymmetric equatorial fork mount.
Sync Version
0 = Paramount ME, Paramount ME, Paramount MX, Paramount MX,
Paramount MYT and Bisque TCS mounts.
1 = Paramount GT-1100S mount.
User Space Version
Shows the current version for the format of the user-defined data that is
saved to the control system’s flash memory.
Focus Axis
MKS 3200. MKS 4000, MKS 5000 and later should be set to 1. Otherwise,
set this value to 0.
Mount Identifier
One of the following:
• Paramount ME
• Paramount ME
• Paramount MX
• Paramount MX
• Paramount MYT
• Bisque TCS
Debug Output?
Set this value to 1 to show control system diagnostics.
Startup Test Joystick RA
If set to 1, then Bisque TCS will abort startup and emit a single beep if the
joystick is not centered when power is turned on.
Startup Test Joystick Dec
If set to 1, then Bisque TCS will abort startup and the control system’s
speaker will emit a single beep if the joystick is not centered when power
is turned on.
Startup Test Joystick
Button
If set to 1, then Bisque TCS will abort startup and the control system’s
speaker will emit a single beep if the joystick button is pressed when
power is turned on.
Startup Test Guider
If set to 1, then Bisque TCS will abort startup and the control system’s
speaker will emit a single beep if any of the guider lines are high when
power is turned on.
Play Guider Sound
If set to 1, the Bisque TCS speaker will emit a single “click” each time the
guider state changes.