Paramount GEM User Guide
134 | P a g e
Raw Tracking Data
Turn on this checkbox to show the positions of the star’s centroid from the tracking log data as a light gray line.
Curve Fit to Tracking Data
Turn on this checkbox to show the optimal periodic error curve computed by clicking the Fit button.
Periodic Error Curve for Bisque TCS
Turn on this checkbox to show a graph of the periodic error curve to be saved to the Bisque TCS control system’s
flash memory. Turning this checkbox on automatically hides the raw and fit graphs.
Open Tracking Log
Click this button to open a tracking log that was generated by the Camera module.
Fit
Click this button to compute and display the graph of an optimal periodic error curve for the tracking log data.
Clear
Click this button to remove or delete the existing tracking log.
Save To Mount
Click this button to save the fit periodic error curve to the Bisque TCS.
Utilities Tab
The Utilities tab provides access to many high-level control system settings.
Hemisphere Setup
Click the Hemisphere Setup text on the right side of the Utilities tab to configure the mount’s tracking direction
and show hemisphere-specific mount status. (The home sensor values are shown only when the mount is
connected.)
To Next Page
Loading...