Software Bisque Paramount 6 Series - Appendix C: Optional Paramount Accessories

Paramount GEM User Guide
175 | P a g e
Appendix C: Optional Paramount Accessories
The table below lists optional accessories for each Paramount model.
Optional Accessory
TheSky Fusion Imaging Appliance
Counterweight Shaft Extension
Bar
n/a
8-in. long, 1.5-in.
wide
8-in. long, 1.875-in.
wide
Counterweights
9 kg/20 lb. and
4.5 kg/10 lb. 1.5-in.
bore hole
9 kg/20 lb. and 4.5
kg/10 lb. 1.5-in.
bore hole
14 kg/30 lb. and 18
kg/40 lb. 1.875-in.
bore hole
Software Bisque Permanent Pier
Power supply cables to use in
conjunction with the mount’s
built-in through the mount
power cabling (page 170)
Base to Pier Adaptor Plate for
mounting the Paramount to an
existing pier
Helium™ Tripod
Latitude Adjustment Wedge for
use below 10 degrees and above
about 64 degrees latitude
n/a
WiSky Wi-Fi Control plugs into
the MKS 5000 printed circuit
board (PCB)
On-axis absolute encoders
Versa-Plate Spacers
n/a
EGO™ Battery to Paramount
Power Adaptor
Soft-sided Carrying Case
n/a
n/a
C11 OTA Mounting Rings
C14 OTA Mounting Rings
n/a