Need help?Do you have a question about the Software Bisque Paramount ME and is the answer not in the manual?
General| Brand | Software Bisque |
|---|---|
| Model | Paramount ME |
| Category | Racks & Stands |
| Language | English |
Details the unique features and advantages of the Paramount ME mount.
Provides instructions for safely unpacking the mount and its components.
Lists all the items included in the Paramount ME package for verification.
Explains the different ports and connectors on the mount's adaptor panel.
Describes the ports and functions of the instrument panel.
Guides on setting the initial altitude of the mount for the observing location.
Instructions for securely mounting the telescope mount to the pier.
Details how to use micro-levelers for precise mount leveling.
Explains the status indicated by LEDs on the adaptor panel.
Describes the sounds the mount makes during initialization and operation.
Step-by-step guide to initiating the homing process with the joystick.
Provides solutions for common issues encountered during mount homing.
A rapid guide for users familiar with telescope operation.
How to home the mount using the TheSky6 software.
Explains the function and use of balance knobs for axis adjustment.
Procedure for disengaging the worm gear for balancing.
How to adjust the mount's altitude for polar alignment.
How to adjust the mount's azimuth for polar alignment.
Using TPoint software for accurate polar alignment calculations.
Steps for mapping celestial objects for alignment.
Process for recording periodic error data for correction.
Details the options available in the PEC tab of the software.
How to smooth recorded PEC data for better accuracy.
A concise guide to setting up and operating the mount on the first night.
Tips for achieving accurate telescope synchronization.
Key points to verify for correct mount synchronization.
Steps to reset and re-synchronize the mount.
Initial steps and requirements for using ProTrack for improved tracking.
How to configure the mount and software to track celestial satellites.
Instructions for enabling DirectGuide for autoguiding without extra cables.
Details on the adapter plates for mounting the ME to a pier.
Steps to check the current firmware version of the mount.
Guide to installing the necessary USB drivers for computer control.
Step-by-step instructions for installing the MKS 4000 USB drivers.
To Next Page
