SolarEdge SE3000US User Manual

Introducing the SolarEdge Power Harvesting System
SolarEdge Installation Guide – MAN-01-00002-1.6
13
Transport and Storage
Single Phase Inverter Transport
The Single Phase Inverter should be transported in its original packaging, facing
up and without exposing the Single Phase Inverter to unnecessary shocks. If the
original package is no longer available, a similar box can be used which can
withstand the weight of the Single Phase Inverter (<52 lb/25 kg), has a handle
system and can be closed fully.
Single Phase Inverter Storage
Store the Single Phase Inverter in a dry place where ambient temperatures are
always between -25°C and +60°C.
Equipment List
Standard tools can be used during the installation of the SolarEdge system. The
following is a recommendation of the equipment to be used when installing a
SolarEdge system:
 Allen screwdriver for M6 and M5 screw types.
 Flat Head screwdriver.
 Electrical screwdriver (tester).
 Drilling machine and bits suitable for a wall or pole, where the inverter
mounting bracket is installed.
 Suitable screws for attaching the inverter mounting bracket to a wall.
 5/16” screws for attaching the power optimizer to the racking.
 Wire cutters.
 Wire strippers.
 Voltmeter.

SolarEdge SE3000US Specifications

General

Brand	SolarEdge
Model	SE3000US
Category	Inverter
Language	English