Installing the Inverter
SolarEdge Installation Guide – MAN-01-00002-1.6
30
3 Hang the inverter on the bracket using the screws on the inverter’s top, as
shown below:
Figure 9: Hanging the Inverter on the Bracket
Do not rest the connectors at the bottom of the inverter on the ground at any time,
as it
may damage them. If you need to rest the chassis on the ground, lay it on its
back, front or side, not on its bottom.
A aucun moment ne posez les connecteurs inférieurs de l'onduleur sur le sol de
peur de les endommager. Si vous avez besoin de poser le cha
ssis sur le sol,
couchez le sur son dos, sur sa face ou son coté, pas sur son bas.
To Next Page
Loading...
Need help?
General