Sonicware LIVEN Texture Lab - Sampling Configuration Settings; Auto Recording Threshold Setup

Sampling settings
34
The following settings are used for sampling.
Setting auto recording
1
Press + to select A.R.LV.
2
Turn .
This can be set to OFF or the input signal level that starts re-
cording automatically ( − 60 – − 20 dB).
If auto recording is o󱐯, press
when in recording standby to
start recording.
• Use func + LINE IN to adjust the LINE IN input gain.
• After recording completes, the volume of the sample will be
normalized automatically.
A
.
R
.
L V