Sonicware LIVEN Texture Lab - Effect Mode Specific Parameters; Effect Buffer Time and Feedback Control; Freezing Line Input Signal

39
• EFX will appear on the display for the following parameters,
which are disabled.
SPEED, EG – RELEASE/attack
Freezing line input
Press to freeze the six seconds of line input signal stored in the
bu󱐯er.
This state can be held by pressing while pressing .
E󱐯ect bu󱐯er time E󱐯ect feedback Grain playback direction
+
Grain playback
direction
--->
<---
RND (Random)
Delay Time Feedback Direction
0 – 127 0 – 127
See the list to the
right
This sets the delay
time before gen
-
eration of the rst
grain.
This can be set
from 4 to 5,944
milliseconds.
This sets the
amount of feedback
for the e󱐯ect.
This sets the grain
playback direction.
The values in the
list to the right can
be selected.
Parameters that are di󱐯erent in
e󱐯ect mode
E󱐯ect Note
+
+
EFX Note Glide
ON、OFF 0 〜 127
When turned ON, the pitch
changes to the pitch
corresponding to the key
pressed based on the low C
key.
The time can be changed
in a range of 0 – 10000
ms.