Sonicware LIVEN Texture Lab - Sequence Data Management: Deletion and Restoration; Clearing Sequence Steps and Data; Restoring Last Saved Sequence State

Deleting sequences
56
Clearing steps
1
Press + 〜
.
The note and parameter lock data from that step will be cleared.
• While pressing , steps that have parameter lock data blink
red.
• When recording notes (REC button lit red), only note data will
be cleared.
• When parameter recording (
lit red), only parameter lock
data will be cleared.
• Normally, when
and buttons are lit red, both note and
parameter data will be cleared.
Clearing all note data in a sequence
1
Press
+
for the pattern with
the sequence to be cleared.
2
Use to select NOTE,
and press
.
This clears all notes on all steps of the sequence.
Restoring only the sound to the last saved
state
1
Press
+
for the pattern with the sound to be restored.
2
Turn to select SND, and press .
N O T E
S N D