Sonicware LIVEN Texture Lab - Pattern Saving and Initialization; Saving and Copying Patterns; Initializing Patterns

Pattern saving
57
Sequences can be saved as patterns.
Saving patterns
1
Press + .
2
Press .
DONE will appear, and it will be saved.
Changing the save destination or copying the pattern
1
Press
+ .
2
Use
、 、 and to select the save destination bank.
3
– to select the save destination pattern.
DONE will appear, and it will be saved.
• In procedure 2, can also be used to select the save
destination (execute with
).
• Press during a procedure to cancel it.
Initializing patterns
1
Select the pattern to be initialized.
( → P.14)
2
Press + .
3
Use to select ALL, then press
Pattern settings along with note and
parameter lock data will all be cleared.
4
Save the pattern.
D O N E
D O N E
A L L