EasyManuals Logo

Sonos CONNECT:AMP Product Guide

Sonos CONNECT:AMP
105 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Sonos Controller for Mac or PC
Lets you control all your music and rooms from any desktop or laptop computer in your house.
Simply install the software and follow the prompts to guide you through setup and music sharing. The Setup CD is
included with most Sonos components or you can download the software at www.sonos.com/support.
Your Home Network
To access Internet music services, Internet radio, and any digital music stored on your computer or Network-Attached Stor-
age (NAS) device, your home network must meet the following requirements:
Home network requirements
High-speed DSL/Cable modem, or fiber-to-the-home broadband connection for proper playback of Internet-based
music services. (If your Internet service provider only offers Satellite Internet access, you may experience playback
issues due to fluctuating download rates.)
If your modem is not a modem/router combination and you want to take advantage of Sonos' automatic online
updates, or stream music from an Internet-based music service, you must install a router in your home network. If
you do not have a router, purchase and install one before proceeding.
If you are going to use a Sonos Controller application on an Android™ smartphone, iPhone®, iPod Touch®, iPad® or
other tablet, you may need a wireless router in your home network. Please visit our Web site at
http://faq.sonos.com/apps for more information.
Connect at least one Sonos component to your home network router using an Ethernet cable, and then you can add
other Sonos components wirelessly.
For best results, you should connect the computer or NAS drive that contains your personal music library collection to your
home network router using an Ethernet cable.
System requirements
500 MHz processor or better
128 MB RAM minimum/256 MB RAM recommended
Network hardware as described above
Compatible operating systems
Windows® XP SP3 and higher
Macintosh® OS X 10.6 and higher
Chapter 1

Table of Contents

Other manuals for Sonos CONNECT:AMP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sonos CONNECT:AMP and is the answer not in the manual?

Sonos CONNECT:AMP Specifications

General IconGeneral
Audio decodersDolby Digital
Amplifier classD
Frequency range22 - 20000 Hz
RMS rated power110 W
Built-in crossoverYes
Crossover frequency80 Hz
Audio output channels2.1 channels
Peak power per channel55 W
Signal-to-Noise Ratio (SNR)- dB
Total Harmonic Distortion (THD)0.02 %
PurposeHome
MaterialAluminum
Product colorWhite
Connectivity technologyWired
Audio (L/R) out2
Headphone outputs1
Headphone connectivity3.5 mm
Speakers connectivity typeBanana connector/Binding posts
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
AC input voltage110-240 V
AC input frequency50 - 60 Hz
Weight and Dimensions IconWeight and Dimensions
Depth207 mm
Width185 mm
Height89 mm
Weight2300 g

Related product manuals