Sonos CONNECT:AMP Product Guide

Sonos Controller for Mac
The Sonos Controller for Mac is compatible with Macintosh OS X, version 10.6 or later. (For the latest system requirements
and compatible audio formats, you can visit our Web site at http://faq.sonos.com/specs.)
For easy setup, you should install the Sonos Controller for Mac software on every Macintosh computer in your network that
contains music files. During the setup process, you may be asked to configure your Macintosh’s firewall for Sonos. Also, if
your Macintosh computer does not have Windows Sharing enabled, the Sonos Controller for Mac will guide you through the
process of enabling it.
Chapter 6

Sonos CONNECT:AMP Specifications

General

Audio decoders	Dolby Digital
Amplifier class	D
Frequency range	22 - 20000 Hz
RMS rated power	110 W
Built-in crossover	Yes
Crossover frequency	80 Hz
Audio output channels	2.1 channels
Peak power per channel	55 W
Signal-to-Noise Ratio (SNR)	- dB
Total Harmonic Distortion (THD)	0.02 %
Purpose	Home
Material	Aluminum
Product color	White
Connectivity technology	Wired
Audio (L/R) out	2
Headphone outputs	1
Headphone connectivity	3.5 mm
Speakers connectivity type	Banana connector/Binding posts
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
AC input voltage	110-240 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	207 mm
Width	185 mm
Height	89 mm
Weight	2300 g