Sonos Controller for Mac or PC
2-17
• Line-In Source Level: A default (typical) line-in source level is automatically assigned based upon the source type. (If
the volume sounds too low, you can select a higher line level. You may experience clipping at higher volume levels if
you set the level too high.)
• Level 1 (source device output voltage: 2.2v) applies the minimum overall gain.
• Level 2 (source device output voltage: 2.0v) is the typical gain applied to A/V equipment.
• Level 6 (source device output voltage: 1.2v) is the typical gain applied to Macs.
• Level 8 (source device output voltage: 1.0v) is the typical gain applied to portable players and PCs.
• Level 10 (source device output voltage: 0.6v) applies the maximum overall gain.
• Autoplay Room: Select the room you want your line-in source to play in whenever it’s connected to Sonos. You can also
check Include Grouped Rooms so that any rooms grouped with the autoplay room will play the same music.
• Use Autoplay Volume: Select this checkbox if you intend to use your MP3 player to adjust the volume in the autoplay
room. Use the slider to set the default volume for the autoplay room when the MP3 player is connected.
5. To play music from this source select Line-In from the MUSIC pane, click next to the music source, and select Play
Now.
Connecting another line-in source to your Sonos System
1. Connect the audio line-in cable provided with your Sonos component (or a standard RCA cable) from the audio out
connection(s) on the external source to the analog audio in connection(s) on the back of your Sonos component. The
source device will automatically be detected.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
