Sonos CONNECT:AMP Product Guide

Product Guide
2-22
SONOS CONNECT Back
Ethernet switch connectors (2) Use Category 5 Ethernet cable to connect to a router, computer, or additional network
device such as a network-attached storage (NAS) device.
AC power (mains) input
(~100-240 V, 50-60 Hz)
Use the supplied power cord to connect to a power outlet.
Analog audio in Use a standard RCA audio cable to connect the audio outputs from a separate audio
component, such as a CD player, to the CONNECT’s analog audio inputs.
Analog audio out
(fixed/variable)
Use a standard RCA audio cable to connect the CONNECT’s analog audio outputs to the
audio inputs on a separate audio component, such as an amplifier or your home theater
receiver.
TOSLINK® digital audio out You can use a TOSLINK optical audio cable to connect the SONOS CONNECT’s TOSLINK
digital audio output to the audio inputs on a separate audio component, such as an
amplifier or your home theater receiver.
Coaxial digital audio out You can use a digital coaxial cable to connect the CONNECT’s coaxial digital audio output
to the audio inputs on a separate audio component, such as an amplifier or your home
theater receiver.

Sonos CONNECT:AMP Specifications

General

Audio decoders	Dolby Digital
Amplifier class	D
Frequency range	22 - 20000 Hz
RMS rated power	110 W
Built-in crossover	Yes
Crossover frequency	80 Hz
Audio output channels	2.1 channels
Peak power per channel	55 W
Signal-to-Noise Ratio (SNR)	- dB
Total Harmonic Distortion (THD)	0.02 %
Purpose	Home
Material	Aluminum
Product color	White
Connectivity technology	Wired
Audio (L/R) out	2
Headphone outputs	1
Headphone connectivity	3.5 mm
Speakers connectivity type	Banana connector/Binding posts
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
AC input voltage	110-240 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	207 mm
Width	185 mm
Height	89 mm
Weight	2300 g