Sonos CONNECT:AMP Product Guide

Sonos Controller for Mac or PC
2-13
1. Choose one of the following:
• Using the Sonos Controller for PC, select Manage -> Settings.
• Using the Sonos Controller for Mac, select Sonos -> Preferences -> Room Settings.
2. Select one of the Sonos components (PLAY:3 or PLAY:5 only) you wish to pair from the Room Settings for drop-down list.
3. On the Basic tab, click Create Stereo Pair and then click Next.
4. Select the other unit you want to pair, and then click Next.
5. Press the Mute button on the Sonos component that will become the left channel.
To separate a stereo pair:
1. Choose one of the following:
• Using the Sonos Controller for PC, select Manage -> Settings.
• Using the Sonos Controller for Mac, select Sonos -> Preferences -> Room Settings.
2. Select the Sonos stereo pair you wish to separate from the Room Settings for drop-down (the stereo pair will appear
with L + R in the room name).
3. On the Basic tab, click Separate Stereo Pair.
4. Click Separate.
Line-out
Some Sonos components are designed to allow you to connect Sonos to a home theater, stereo, or powered speakers using
either analog or digital audio outputs.
• The CONNECT has both digital and analog outputs
• The ZonePlayer 100 has analog outputs only
For additional information on connecting audio devices, go to our Web site at http://faq.sonos.com/cables.
Connecting to a home theater
1. Choose one of the following options:
• If you have digital inputs on your home theater receiver and your Sonos component supports digital audio output, you
can use either a TOSLINK® optical audio cable or a digital coaxial cable to connect from the Sonos component’s digital
audio output to the digital input on your home theater receiver.
• If you have analog inputs on your receiver, use a standard RCA audio cable to connect from the Sonos component’s
analog audio output to the audio inputs on your home theater receiver.
2. Select the proper input channel on your home theater system.
3. If you are setting up a new Sonos component that has audio outputs, plug it in and then select Add a Sonos Component
from the Manage menu.

Sonos CONNECT:AMP Specifications

General

Audio decoders	Dolby Digital
Amplifier class	D
Frequency range	22 - 20000 Hz
RMS rated power	110 W
Built-in crossover	Yes
Crossover frequency	80 Hz
Audio output channels	2.1 channels
Peak power per channel	55 W
Signal-to-Noise Ratio (SNR)	- dB
Total Harmonic Distortion (THD)	0.02 %
Purpose	Home
Material	Aluminum
Product color	White
Connectivity technology	Wired
Audio (L/R) out	2
Headphone outputs	1
Headphone connectivity	3.5 mm
Speakers connectivity type	Banana connector/Binding posts
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
AC input voltage	110-240 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	207 mm
Width	185 mm
Height	89 mm
Weight	2300 g