EasyManuals Logo

Sonos CONNECT:AMP Product Guide

Sonos CONNECT:AMP
105 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #79 background imageLoading...
Page #79 background image
Sonos Controller for Mac or PC
6-5
Editing an alarm
1. Click Alarms, select an alarm from the list, and then click Edit.
2. Make the desired changes.
If you check Include grouped rooms, the alarm will play in the rooms that are grouped together at the time the alarm
goes off. It does not play in the rooms that were grouped when the alarm was originally added to the Sonos system.
If you check Shuffle music, the play mode for the selected alarm music will be set to shuffle.
3. Click OK.
Deleting an alarm
1. Click Alarms.
2. Select the alarm you wish to delete, and then click .
Turning on an alarm
To turn on an alarm:
Click Alarms, and then select the checkbox next to the alarm you want to turn on.
Turning off an alarm
When the alarm goes off, click to turn it off.
Showing the clock screen
Once an alarm has been added to your Sonos system, you can set a preference to have the clock screen show automatically
on a SONOS CONTROL when the alarm sounds.
1. From the Music menu on the CONTROL, select Alarms.
2. Touch Alarms, and then select the alarm from the list.
3. Select Advanced -> Show Clock on this Controller. (If you want the clock to show on another SONOS CONTROL, repeat
this process on the other controller.)
Setting a sleep timer
1. Click Sleep Timer.
2. Select the desired time frame.
3. If you wish to turn the sleep timer off, select Off from the list.
When a sleep timer is active, the duration displays next to Sleep Timer.
Note: You can also turn on an alarm when adding or editing it.

Table of Contents

Other manuals for Sonos CONNECT:AMP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sonos CONNECT:AMP and is the answer not in the manual?

Sonos CONNECT:AMP Specifications

General IconGeneral
Audio decodersDolby Digital
Amplifier classD
Frequency range22 - 20000 Hz
RMS rated power110 W
Built-in crossoverYes
Crossover frequency80 Hz
Audio output channels2.1 channels
Peak power per channel55 W
Signal-to-Noise Ratio (SNR)- dB
Total Harmonic Distortion (THD)0.02 %
PurposeHome
MaterialAluminum
Product colorWhite
Connectivity technologyWired
Audio (L/R) out2
Headphone outputs1
Headphone connectivity3.5 mm
Speakers connectivity typeBanana connector/Binding posts
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
AC input voltage110-240 V
AC input frequency50 - 60 Hz
Weight and Dimensions IconWeight and Dimensions
Depth207 mm
Width185 mm
Height89 mm
Weight2300 g

Related product manuals