Sonos CONNECT:AMP Product Guide

Product Guide
2-26
SONOS PLAY:3 Back
Threaded mounting hole
1/4" (6.75mm) /
20-thread
The SONOS PLAY:3 has an integrated mounting hole on the back of the unit so it can be wall-
mounted if desired (mounting bracket not included.)
Ethernet switch connector Use Category 5 Ethernet cable to connect to a router, computer, or additional network device
such as a network-attached storage (NAS) device.
LED indicators:
• Green (link connection)
• Flashing Yellow (network activity)
AC power (mains) input 
(~100-240 V, 50-60 Hz)
Use the supplied power cord to connect to a power outlet.

Sonos CONNECT:AMP Specifications

General

Audio decoders	Dolby Digital
Amplifier class	D
Frequency range	22 - 20000 Hz
RMS rated power	110 W
Built-in crossover	Yes
Crossover frequency	80 Hz
Audio output channels	2.1 channels
Peak power per channel	55 W
Signal-to-Noise Ratio (SNR)	- dB
Total Harmonic Distortion (THD)	0.02 %
Purpose	Home
Material	Aluminum
Product color	White
Connectivity technology	Wired
Audio (L/R) out	2
Headphone outputs	1
Headphone connectivity	3.5 mm
Speakers connectivity type	Banana connector/Binding posts
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
AC input voltage	110-240 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	207 mm
Width	185 mm
Height	89 mm
Weight	2300 g