Sonos CONNECT:AMP Product Guide

Sonos Controller for Mac or PC
2-11
1. Plug a pair of headphones into the headphone jack. (Sonos will automatically drop the volume level down to 25%.)
2. Put on your headphones and increase the volume to a comfortable listening volume.
3. Remove the headphone jack from the back of the PLAY:5 when you are ready to resume listening through the built-in
speakers.
Important Note: Long term exposure to music played at high volume through headphones
can cause permanent hearing damage.
Note: If you don’t hear sound coming from your PLAY:5, check to make sure there are no
headphones plugged into the back of the unit.

Sonos CONNECT:AMP Specifications

General

Audio decoders	Dolby Digital
Amplifier class	D
Frequency range	22 - 20000 Hz
RMS rated power	110 W
Built-in crossover	Yes
Crossover frequency	80 Hz
Audio output channels	2.1 channels
Peak power per channel	55 W
Signal-to-Noise Ratio (SNR)	- dB
Total Harmonic Distortion (THD)	0.02 %
Purpose	Home
Material	Aluminum
Product color	White
Connectivity technology	Wired
Audio (L/R) out	2
Headphone outputs	1
Headphone connectivity	3.5 mm
Speakers connectivity type	Banana connector/Binding posts
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
AC input voltage	110-240 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	207 mm
Width	185 mm
Height	89 mm
Weight	2300 g