Sony DCR-PC350 - Page 201

DV MECHANICAL ADJUSTMENT MANUAL VII
HELP
Conversion gear
Belt
Conversion
gear shaft
Conversion
gear shaft
LS guide roller (S2)
LS guide roller (S1)
TG2 cam
plate assy
S2 shaft
S1 shaft
S1
shaft
S2
shaft
M slider
shaft
LS arm assy
LS guide shaft S1
Cam gear
LS arm shaft
LS arm shaft
Apply grease when installing it.
Amount of grease:
a ball of grease of 1.0 mm diameter
Apply grease
Apply grease when installing it.
Amount of grease: a ball of
1.0 mm diameter of grease
TG2 cam
plate assy
Apply grease when installing it.
Amount of grease: a ball of
1.0 mm diameter of grease
S1 shaft, S2 shaft
Apply
grease
Apply
grease
Apply grease when installing it.
Amount of grease: a ball of
1.0 mm diameter of grease
Apply grease
Apply grease in parallel
with the side (red line)
Apply grease when installing it.
Amount of grease: a ball of 1.0 mm
diameter of grease
Apply grease when installing it.
Amount of grease: a ball of 1.0 mm
diameter of grease
Points to be noted
Apply Grease
LS guide roller S1, S2
Apply
grease
Apply
grease
Apply grease (2)