DV MECHANICAL ADJUSTMENT MANUAL VII
HELP
Apply grease when installing it.
Amount of grease:
a ball of grease of 1.0 mm
diameter
Apply grease
(Inner side)
B
C
D
E
F
G
A
3mm
Mechanical chassis
block assy
GL driving arm
GL driving arm
Cam gear shaft
Cam gear
Conversion
gear
GL driving arm
M slider shaft
M slider assy
Cam gear shaft,
M slider shaft
Rotary encoder
Cam gear
GL driving arm
Conversion gear
shaft
Apply grease when installing it.
Amount of grease:
a ball of grease of 1.0 mm diameter
Apply
grease
Apply grease when installing it.
Amount of grease: a ball of 1.0 mm
diameter of grease
Neck groove of the shaft where the
M slider slides
Shaft hole
Notch
Top tip
Apply grease when installing it.
Amount of grease:
A
a ball of 3.0 mm diameter of grease
B
to
G
a ball of 2.0 mm diameter
of grease
Sides of the both grooves
Apply grease (3)
To Next Page