7-9
DSR-2000/2000P
Claw
Claw
Claw
Claw
Reel cover S
Reel cover T
P1.4 x 3
P1.4 x 3
L push plate
P1.4 x 3.5
Replacement
1. Removing the MD cover
Remove the MD cover. (Refer to Section 7-2.)
2. Moving the S/T reel tables
Turn the reel shift motor gear by a finger to bring
the S/T reel tables to the standard cassette
position.
(Refer to Section 7-19.)
3. Removing the L push plate (only when
replacing the T-side brake assembly)
Remove the two screws to remove the L push
plate.
4. Removing the MIC assembly (only
when replacing the T-side brake
assembly)
Remove the MIC assembly.
(Refer to Section 7-19.)
5. Removing the reel cover
Remove the screw, and then release the two claws
to remove the reel cover S or T.
7-3. S/T Brake Assembly Replacement
To Next Page
Loading...
