129
English
Deutsch
8 Universal output signal setting
The universal output signal function can be changed according to the purpose of use. There are two outputs.
9 Key lock setting
The key lock function lets you prohibit key operations during count operation. When there is no need to change settings during
actual operation, setting this function in advance prevents workers from inadvertently changing the setting contents.
Initial value
“O.SG” and subordinate menu
setting is necessary. (For AUTO
input, set the numbers in the
fourth and fifth digits of the
second input screen.)
Output
signals used?
For individual input:
Output 1: Display mode
Output 2: Alarm
For AUTO input:
• • • 1 2 • • •
Setting unnecessary
Initial value
“KYL” menu setting is
necessary. (For AUTO input, set
the number in the sixth digit of
the second input screen.)
Key locking
necessary?
For individual input:
Keys unlocked
For AUTO input:
• • • • • 2 • •
Setting unnecessary
(No)
(Yes)
(Yes)
(No)
Display mode and alarm
used as output signals?
(Yes)
(No)
(Initial value)
(Initial value)
To Next Page
Loading...
