Sony PMW-EX280 - Page 13

No. Signal I/O Specifications
2 TMDS DATA2
SHIELD
— —
3 TMDS DATA2– OUT —
4 TMDS DATA1+ OUT —
5 TMDS DATA1
SHIELD
— —
6 TMDS DATA1– OUT —
7 TMDS DATA0+ OUT —
8 TMDS DATA0
SHIELD
— —
9 TMDS DATA0– OUT —
10 TMDS CLOCK+ OUT —
11 TMDS CLOCK
SHIELD
— —
12 TMDS CLOCK– OUT —
13 CEC (N.C.) — —
14 RESERVED (N.C.) — —
15 SCL OUT —
16 SDA IN/OUT —
17 DDC/CEC GND — —
18 +5V POWER OUT —
19 HPD IN —
12. External device connector
USB (Series A), 4-pin
- External View -
14
No. Signal I/O Specifications
1 USB_VBUS — USB Vcc
2 DATA (–) IN/OUT I/O USB–
3 DATA (+) IN/OUT I/O USB+
4 GND — Ground
13. LENS REMOTE
- External View -
8-pin, Female
8 1
7 2
6
5 4
3
No. Signal I/O Specifications
1 COMMON
–V
OUT GND
Continued
No. Signal I/O Specifications
2 ZOOM IN GND: WIDE, 1.66 V:
STOP, 3.33 V: TELE
3 COMMON
+V
OUT 3.33 V
4 COMMON IN 1.66 V
5 REC IN GND: ON, OPEN: OFF
6 RET IN GND: ON, OPEN: OFF
7 SW COM-
MON
OUT GND
8 FRAME
GND
—
PMW-200/PMW-EX280
1-3