SPACE s.r.l.
Soc.a socio unico
PFB035 SERIES – PFB040 SERIES
PFB045 SERIES – PFB060 SERIES
SPRT102/4 SERIES – SPRT102/5 SERIES
SPRT102/6 SERIES – SPRT102/7 SERIES
Code M0247 - Ver.1.4
(09/2016)
SPACE s.r.l. – 10090 TRANA (TO) Via Sangano, 48
Tel. (+39) 011/ 934 40 300 – Fax (+39) 011/ 933 88 64
e-mail: info@spacetest.it - www.spacetest.com
4.4. Update the SW (ONLY for MCTC-Net2 in Italy)
The software will automatically check before starting (at least once a day) if there are
updates, inclusive of new keys to sign the .PFR files, or it’s possible to manually check as
follow:
From the main page (logo) as seen in Figure 27 use the key “F3”, the menu in Figure 20
will be shown.
With F2 select the icon “UPDATE SW” and press ENTER/F4 to confirm.
Figure 20
After the confirmation. The software will show the
message in Figure 21.
At the end of the check, the software will show Figure
22.
If any new version of the software is found, the
software will show the update on green line (as in the
example).
If no update is found, a not highlighted line will be
shown.
Press the key START/F3 to download the updates
and wait.
At the end of the download, if it’s been successful,
the software will show the message as Figure 20.
To Next Page