SPACE s.r.l.
Soc.a socio unico
PFB035 SERIES – PFB040 SERIES
PFB045 SERIES – PFB060 SERIES
SPRT102/4 SERIES – SPRT102/5 SERIES
SPRT102/6 SERIES – SPRT102/7 SERIES
Code M0247 - Ver.1.4
(09/2016)
SPACE s.r.l. – 10090 TRANA (TO) Via Sangano, 48
Tel. (+39) 011/ 934 40 300 – Fax (+39) 011/ 933 88 64
e-mail: info@spacetest.it - www.spacetest.com
13. MAINTENANCE
IMPORTANT!: Routine maintenance operations must be performed annually by skilled personnel
authorized by SPACE S.R.L.
The only maintenance operations the user of the appliance is allowed to perform
are simple ones that nevertheless require the authorization of the plant manager.
Before performing any maintenance jobs disconnect the appliance from the power
mains and interrupt the main power supply.
Whenever maintenance jobs require removal of the brake tester covers, the work
area must be fenced off and identified by suitable notices to prevent unauthorized
persons accidentally accessing it. A notice should also be placed on the control
console indicating that maintenance work is in progress, with the wording “Machine
being serviced; DO NOT TOUCH”.
Maintenance operations must be performed at least every 6 months. If the appliance is used frequently,
this schedule should be shortened to 2-3 months.
More specifically, after checking that all the above safety measures have been taken:
- grease the brake tester roller chains: use specific grease for chains and apply this with a brush
- clean the bottom of the brake tester and suspension tester pits with a vacuum cleaner; part
movement must not be hindered and the air vents of the electric motors and the water drainage
outlets must not be blocked.
- clean the monitor using a dry, soft and antistatic cloth; if it is very dirty, clean it with a well-wrung
damp cloth and then dry.
- clean the keyboard by brushing with a brush; when this is not used, it is in any case best to always
protect it with a suitable cover to prevent dust entering.
- cleaning and changing cartridges and other printer maintenance operations are described in the
printer manual. Always refer to the latter before performing any maintenance operation on the
printer.
IMPORTANT!: Any other maintenance operation not described above (such as, for instance, routine
yearly maintenance or checking settings) is described in the installation and settings
manual; these operations can only be performed by skilled personnel authorized by
SPACE S.R.L.
14. STORING AND SCRAPPING
Storing – If the machine is stored for a long period of time, all supplies must be disconnected and
parts, such as printer and monitor, must be protected that could be damaged by excess dust
deposits.
Grease the parts that could be damaged in case of drying.
Scrapping and disposal
- If the decision is taken to no longer use the machine, this must be made inoperative.
- Those parts that could represent hazard sources should be made harmless.
- Assess the part according to the degree of disposal.
- Scrap as scrap iron through authorized channels.
- If considered special waste, this must be removed and split into uniform types
before disposing according to applicable regulations.
In order to inform the users regarding the correct disposal of batteries and accumulators, please take note of the
following: the meaning of the symbol with the crossed-out wheelie bin marked on the accumulator is that the product
cannot be disposed of in municipal solid waste (i.e. together with “mixed waste”).
It must be handled separately with the purpose of performing specific operations for its reuse or treatments for eliminating and
disposing safely of any substances that could be dangerous for the environment and extract and recycle the raw materials that
may be reused. For further detailed information on the end-of-life treatment of batteries and accumulators, please contact the
After-sales department of SPACE S.R.L.
To Next Page
Loading...