SPACE s.r.l.
Soc.a socio unico
PFB035 SERIES – PFB040 SERIES
PFB045 SERIES – PFB060 SERIES
SPRT102/4 SERIES – SPRT102/5 SERIES
SPRT102/6 SERIES – SPRT102/7 SERIES
Code M0247 - Ver.1.4
(09/2016)
SPACE s.r.l. – 10090 TRANA (TO) Via Sangano, 48
Tel. (+39) 011/ 934 40 300 – Fax (+39) 011/ 933 88 64
e-mail: info@spacetest.it - www.spacetest.com
2.6. Operating precautions
IMPORTANT!: During brake testing, the vehicle is sometimes reactively pushed off the
rollers. To prevent this occurring, pull the handbrake, when this does not
affect the axle being tested.
IMPORTANT!: The vehicle must be tested with the motor running so the servo brake
expansion box is loaded. It is important to have the motor running especially
when a vehicle is being tested with hydropneumatic compensation type
suspensions.
The steering lock of the vehicle being tested must not be engaged.
IMPORTANT!: Vehicles with permanent four-wheel drive can only be tested on the REVERSE
version brake tester with 4WD program switched on. This enables the wheels
to be turned in the opposite direction so as to uncouple the differential and
prevent transmitting driving torque to the axle not being tested.
IMPORTANT!: Before performing a test, make sure the brakes are dry and that tire pressure
is correct.
To Next Page
Loading...