9-5Lasair® Pro Aerosol Particle Counter Operations Manual
Chapter 9 : Recipes
Creating NFC Recipes
Recipes can be stored to an NFC card so the user can easily switch between recipes
configured for dierent areas, rooms, and locations. A maximum of 50 locations can be
used with one NFC recipe card.
1. Press , then (COMM).
2. Go to the NFC tab and press the Enable Location/Recipes and Enable Write NFC
indicators. A gray dot indicates the setting has not been enabled.
Figure 9-4. NFC tab, COMM
3. Aer configuring sampling settings found in SAMPLE, ALARMS, LOCATIONS, and
STATISTICS, navigate to > (SAMPLE).
4. Press to open the keyboard to name the new recipe.
To Next Page
Loading...
