Spektrum ix20 - Back Mixing

BACK MIXING
Back Mixing applies to all related servos in a multi servo Aileron/Flapped wing or a multi servo
split elevator. Creating a mix to RAL (Right Aileron) or LAL (Left Aileron) will create different
results and enable you to use fewer mixes to achieve the desired response.
Example 1: Creating a mix AIL > RAL will move the ailerons in opposite directions. Creating a
mix AIL > LAL will move the ailerons in the same direction.
Example 2: Creating a mix ELE > REL will move the elevator halves together. Creating a mix
ELE > LEL will move the elevator halves in the opposite direction (tailerons).
IMPORTANT: Be sure the ailerons and/or elevators are plugged into the correct left/right port
for this function to work.
TOC