CHANGE THE THROTTLE RATCHET
1. Locate the throttle strap adjustment screws on both gimbals. The ratchet set screw engages
a serrated section on the gimbal for a ratcheted throttle, while the tension set screw engages
a strap for smooth tension on the gimbal.
2. To engage the throttle ratchet, using a small Phillips screwdriver, turn the ratchet set screw
clockwise until the ratchet engages.
3. To disengage the throttle ratchet, using a small Phillips screwdriver, turn the screw
counterclockwise until the gimbal moves freely.
Ratchet set
screws
Tension set
screws
To Next Page
Loading...
