GYRO
Gyro options for Heli and Acro model types are considerably different.
HELI GYRO
The Gyro menu is enabled to manage tail gyro gain when the Model Type is set to Helicopter.
Touch Switch to select a switch or On. The
number of gyro gain positions will correlate to
the switch chosen. If On is selected, only one
position is set. Select a channel to assign to
the gain; this is the channel the gain signal
from the gyro needs to be plugged into on the
receiver. Most gyros will use one side of the
gain channel for heading hold and the opposite
side for rate mode. Consult the gyro manual for
more information.
To Next Page
