PHYSICAL TRANSMITTER ADJUSTMENTS
The adjustment points for the iX20 are located around the face of each gimbal.*
This arrangement allows for quick and easy adjustment without removing the back cover.
Available adjustments:
• Mode Change
• Throttle Ratchet
• Throttle Tension
• Stick Tension
• Rear Lever Tension
*The gimbal adjustment screws are covered by small rubber plugs, and the throttle limit switches
are covered by small plastic caps. Carefully remove these covers prior to making adjustments.
The rubber plugs are not interchangeable. Ensure to note where each plug is removed from and
replace them accordingly.
To Next Page
Loading...
