Spektrum ix20 - Receiver Port Assignment

RECEIVER PORT ASSIGNMENTS
Channels can be re-assigned to any receiver port. Receiver ports have default assignments in a
familiar order; however, this can be re-congured so any of the channels can connect to any of
the receiver ports.
Multiple receiver ports can be assigned to the same channel.
To change the receiver port assignments:
1. Touch and drag up to scroll to the bottom of
the Channel Input Conguration menu.
2. Touch the RX PORT ASSIGNMENT button.
3. Touch the drop down menu button next to
the receiver port.
4. Select the channel to be assigned to that
receiver port.
TOC