WIRED TRAINER
Wired Trainer enables a student and instructor to work together by physically connecting two
transmitters together with a cable.
The optional Spektrum wired trainer adaptor (SPMA3091, not included) and trainer cable
(SPM6805, not included) are required for wired trainer operation. The wired trainer adaptor
connects to the serial port on the back of the transmitter. The trainer cable plugs into the adaptor.
Wired trainer supports up to 8 input channels with PPM based trainer systems connected. If the
iX20 is used with a wired connection, the correct wired trainer option must be selected in the
trainer menu and the student mode started or the wired trainer connection will not work.
To Next Page
Loading...
