Spektrum ix20 - Setting up a New Model

SETTING UP A NEW MODEL
Each model type has its own set of default settings to match the application.
See the Model Type section of this manual for the default assignments in each model type.
Default settings include switch assignments for auxiliary channels and ight modes, voice alerts,
timers and the channel output assignments on the receiver.
Out of the box, the transmitter will have one Acro model stored in the model memory. Use this
default or create a new model. Tap in the upper left corner of the Spektrum AirWare app main
screen to add a new airplane, helicopter, sailplane, or multirotor model.
After selecting the model type and before binding, tap the Model Setup button from the main
screen in the Spektrum AirWare app to access the model setup options.
The most critical setup option is Aircraft Type and will dene many pre-congured options
such as specialized mixing for multi servo wings, swashplates for helicopters and other aircraft
type-specic options. These options vary signicantly between aircraft types, and this should be
set prior to binding.
Assign switches and functions to suit the aircraft setup needs.