Flap to Elevator (FLP > ELE)
Flap to Elevator mix prevents pitch up tendency that occurs when Crow or Buttery mixing is
applied. This mix is typically used only with the Camber System. The Flap to Elevator mix operates
as a curve so the elevator response can be matched to specic points in the spoiler stick travel.
This enables the pilot to ensure the elevator compensation is correct throughout the ap range.
For sailplanes with ailerons/tips/aps, ensure an appropriate Sailplane Type is selected in Model
Setup so that tips appear in the transmitter as RAIL and LAIL. Decrease or increase travel on the
tip ailerons by creating an AIL > RAIL mix.
To Next Page
Loading...
