AS3X
®
To use this feature, the Telemetry menu must rst be congured for use with AS3X
®
technology
in Model Setup, and the iX20 must be bound to a compatible AS3X receiver that has been
congured for remote gain. Receiver conguration is done separately from the iX20 setup. Refer
to the receiver manual for more information.
When using a compatible AS3X receiver, the
AS3X menu allows:
• Gains to be adjusted from the transmitter
• Selection of the gain adjustment input switch
• Selection of the channel through which gain
adjustments are made
• Selection of the ight mode switch
• Real time display of gain values for Roll, Pitch
and Yaw
To Next Page
