Spektrum ix20 - Aircraft Type

AIRCRAFT TYPE
Aircraft Type denes what type of model conguration the iX20 is set up to control. Therefore,
this menu should be the rst step after creating a new model. The choices made in this menu
dene default channel assignments and enable pre-dened mixes with custom menus designed
specically for the selected application. This menu appears differently for each of the four model
options chosen from during model creation in Model Utilities.
Choosing from the common congurations in this menu opens access to other menus not shown
otherwise. Flaps, for example, can be assigned to a switch and made to function without using
one of the pre-congured options. However, by assigning the correct wing type in the Aircraft
Type menu, a Flap System menu is enabled in the Model Adjust list. The Flap System menu
gives the pilot the choice of switches and a built-in elevator compensation mix, which makes
ne-tuning an airplane for level ight throughout the ap range much easier. Options that enable
mixes will label the default assigned channels in other menus, such as Servo Setup and Monitor.
In menus options, select an on-screen diagram that matches the control layout on the aircraft.
TOC