ADD A NEW MODEL
1. Touch the expand icon (
) at the top right corner of the Model Utilities screen.
2. Select Add a New Model from the drop down menu.
3. Select Default or Template from the pop up menu. Use Default to create a model using
default values for all model settings. Use Template to start from a model template that has
been saved to the iX20 transmitter.
4. Select the desired model option and select Create to continue.
5. The iX20 will return to the Model Utilities screen and the new model will be selected. Touch
the new model to enter the Model Details screen or touch the back arrow at the top left of the
screen to return to the Dashboard.
TIP: Set up a generic model in each model type with desired switch assignments, rates,
curves, and other details; name the model, and save it as a template. Future setups can be
based on the saved template by selecting Template during the process of adding a new model.
To Next Page
Loading...
