SmartBits 600x/6000x Installation Guide | 137
Appendix G
Revision History
Spirent Communications increments the revision letter in a manual’s part number when
the technical content changes. When minor non-technical changes (cosmetic or editorial)
are made, the revision letter does not increment, but remains the same.
Revision A: (March 2004) First release of this manual.
Revision B: (October 2004) Updated manual to include the following changes:
• Added the following modules to Table 1-3 on page 18:
• XFP-3730A 10GBase Ethernet XFP MSA, 1-port, 1-slot, SmartMetrics module
• XFP-3731A 10GBase Ethernet XFP MSA, 1-port, 1-slot, TeraMetrics module
• Fixed ON/OFF switch information to read I for ON and O for OFF (see “Procedure 6:
Connect the SmartBits Power Cord” on page 38).
• Corrected dimension specifications (see Table 1-4 on page 21).
• Corrected PC/UNIX workstation requirements (see page 29).
• Updated cabling kit information (see “Checking the SmartBits Package” on page 30
and Table 2-1 on page 35).
• Added graphics to “Procedure 12: Connect to the DUT and Check Cabling” on page
67.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...