Chapter 2: Installation and Setup
Procedure 3: Install SmartBits Applications
32 | SmartBits 600x/6000x Installation Guide
Procedure 3: Install SmartBits Applications
Before proceeding with the chassis setup and installation, you should:
• Install the SmartBits applications software.
• Print/review the Release Notes, which sometimes have important last-minute
installation and test setup details not included in this installation guide.
• Print user documentation now or later, as needed.
Installing the SmartBits Applications
To install SmartBits applications:
1 To install the core applications (SmartWindow, SmartLibrary, and
SmartApplications), insert each SmartBits CD into the CD-ROM drive of your PC.
2 If the autoplay on your PC does not automatically start the installation, click on the
setup.exe file in the Setup folder on the CD. The Installation Wizard will prompt you
to install the specific application.
To install the SmartLibrary programming library, follow the instructions in the
SmartLibrary documentation or Release Notes.
Note: Documentation for the SmartBits chassis, as well as for SmartWindow,
SmartLibrary, and SmartApplications (user guides and reference manuals), is provided on
the SmartBits Documentation CD. Documentation for additional software applications is
provided on the CD for each application.
3 If you have purchased any optional SmartBits software applications, such as
SmartFlow, you will have an additional CD per application, which will provide both
the software and the user guide for that application. You may wish to install those
applications now.
4 If you purchased any optional SmartBits applications, such as SmartFlow, you should
also have a 3.5 in. (8.9 cm.) disk which contains one or more key files needed to run
the optional application. Be sure to copy the licensed <application>key.txt file into
the program directory of each optional application. (Also refer to “Key Files” on page
117.)
Important: If you do not install the required key file for an optional application and you
access the software, you will receive an error message and automatically be placed in
demo mode.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...