Chapter 2: Installation and Setup
Procedure 2: Check the Chassis and Package
SmartBits 600x/6000x Installation Guide | 31
• SmartBits application CDs for bundled and optional software packages.
• SmartBits 3.5 in. (8.9 cm) firmware disks or a SmartBits firmware CD.
• SmartBits 3.5 in. (8.9 cm) Key File disk(s) (for optional applications ordered; not
required for SmartWindow, SmartLibrary, or SmartApplications).
• SmartBits Documentation CD (for SmartWindow, SmartLibrary, and
SmartApplications user guidess).
• SmartBits 600x/6000x Installation Guide (this document).
Adding or Rearranging Modules
Each SmartBits 600x chassis can hold up to two modules; each SmartBits 6000x chassis
can accommodate up to 12 modules. The connector and interface for each module slot on
either chassis is configured identically. Therefore, any SmartBits module may be installed
into any SmartBits 600x/6000x chassis module slot. (Note that some SmartBits modules
require two SmartBits 600x/6000x chassis slots or have other special installation
requirements.
Warnings: • Always turn the power off to the SmartBits chassis before inserting or
removing modules.
• All unused slots MUST BE COVERED with the provided blank face-
plates to maximize airflow inside the chassis and reduce ambient noise
level.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...