Chapter 2: Installation and Setup
Procedure 1: Check the System Requirements
SmartBits 600x/6000x Installation Guide | 29
Procedure 1: Check the System Requirements
You must have the following hardware and software in order to use a SmartBits 600x/
6000x chassis. Review these requirements carefully to ensure successful installation.
PC/UNIX Workstation Requirements
• An IBM compatible PC (400 MHz Pentium III recommended) or a UNIX workstation
with the following items:
• One 10/100Base-T UTP cable and a 10 Mbps or 10/100 Mbps Ethernet NIC card
installed in the PC.
• Minimum of 128 MB RAM; 256 MB RAM is recommended.
• Minimum 40 MB space on the hard drive; a 4 GB (or larger) hard drive is
recommended.
• A 3.5 in. (8.9 cm.) high density floppy disk drive, a mouse, and a SVGA color
monitor or equivalent.
• Serial port capable of running at least 38,400 baud.
•CD-ROM drive
• Microsoft Windows 2000 Pro SP4, NT SP6a, XP SP1a (for PCs)
• Solaris OS 7.0 (aka 2.7) and 8.0 (aka 2.8)
• Linux OS Red Hat 7.3 and Red Hat EL 3
• TCL 8.3.5 and 8.4.5 support
• Microsoft Terminal or HyperTerminal or another communications application.
• Acrobat Reader 5.0 or later with extended Search functionality for Windows.
Required by Windows users who want to view and search SmartBits documentation,
including the SmartLibrary Documentation Catalog.
• Acrobat Reader 5.0 with extended Search functionality for UNIX. Required by UNIX
users who want to view and search SmartBits documentation, including the
SmartLibrary Documentation Catalog. (Versions of Acrobat Reader later than 5.0 do
not currently support the extended Search function on UNIX operating systems.)
When using Acrobat Reader 5.0, Linux and Solaris users may experience limitations
in the extended Search capabilities used to navigate the SmartLibrary Documentation
Catalog. Please refer to the SmartLibrary Release Notes for more information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...