EasyManuals Logo

ST STM32F105 series User Manual

ST STM32F105 series
1128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
DocID13902 Rev 15 54/1128
RM0008 Memory and bus architecture
63
3.3.1 Embedded SRAM
The STM32F10xxx features up to 96 Kbytes of static SRAM. It can be accessed as bytes,
half-words (16 bits) or full words (32 bits). The SRAM start address is 0x2000 0000.
3.3.2 Bit banding
The Cortex
®
-M3 memory map includes two bit-band regions. These regions map each word
in an alias region of memory to a bit in a bit-band region of memory. Writing to a word in the
alias region has the same effect as a read-modify-write operation on the targeted bit in the
bit-band region.
In the STM32F10xxx both peripheral registers and SRAM are mapped in a bit-band region.
This allows single bit-band write and read operations to be performed. The operations are
only available for Cortex
®
-M3 accesses, not from other bus masters (e.g. DMA).
A mapping formula shows how to reference each word in the alias region to a corresponding
bit in the bit-band region. The mapping formula is:
bit_word_addr = bit_band_base + (byte_offset x 32) + (bit_number × 4)
where:
bit_word_addr is the address of the word in the alias memory region that maps to the
targeted bit.
bit_band_base is the starting address of the alias region
byte_offset is the number of the byte in the bit-band region that contains the targeted
bit
bit_number is the bit position (0-7) of the targeted bit.
Example:
The following example shows how to map bit 2 of the byte located at SRAM address
0x20000300 in the alias region:
0x22006008 = 0x22000000 + (0x300*32) + (2*4).
Writing to address 0x22006008 has the same effect as a read-modify-write operation on bit
2 of the byte at SRAM address 0x20000300.
Reading address 0x22006008 returns the value (0x01 or 0x00) of bit 2 of the byte at SRAM
address 0x20000300 (0x01: bit set; 0x00: bit reset).
For more information on Bit-Banding, please refer to the Cortex
®
-M3 Technical Reference
Manual.

Table of Contents

Other manuals for ST STM32F105 series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ST STM32F105 series and is the answer not in the manual?

ST STM32F105 series Specifications

General IconGeneral
BrandST
ModelSTM32F105 series
CategoryMicrocontrollers
LanguageEnglish

Related product manuals