Stellar
®
AutoTarper Owner’s Manual | Page 49
Daily before each use, rephase the arm and slide cylinders (See Cylinder Rephase
Procedure on previous page).
Move the arms upward to the top front of the container. Operate the slide to clear the
front corner of the container.
Make certain that the area around truck and AutoTarper is clear of
personnel and obstacles overhead before operating. Overhead clearance must be
minimum of 20 foot.
Stand clear of the arms during operation. Movement of arms may be
quicker than expected.
Tarping Step 1: Rephase cylinders.
Tarping Step 2: Arms up. Slide forward.
To Next Page
Loading...