Stonex R25/R25LR Total Station - User Manual 32
Code Record: the codeblock can be saved before or after the measurement.
Face I Def.: the following two options can be set to define face I:
• Face I, which is the one where the plate level is positioned; often it is referred to as left face;
• Face II, which is the one where the spherical level is positioned; often it is reffered to as right face.
Data Output: the following two options can be set:
• RS232: data is recorded via the serial interface. For this purpose, a data storage device must be
connected;
• Intern: all data is recorded in the internal memory.
Coord Format: It is possible to choose between two coordinate formats:
• N-E-Z;
• E-N-Z.
After selecting the options, press key F4[SET] to save.
To Next Page
Loading...
